| Description | RVD6SF | RVD12SF | RVD20SF |
|---|---|---|---|
| Max Drilling Cap insteel(400n/mm2) in mm | 6 | 12 | 20 |
| Spindle Nose | PB16/MT1/ER16 | PB20/MT1/ER20 | PB20/MT2/ER32 |
| Spindle Motor | 0.37kw/440v | 0.75kw/440v | 1.1kw/440v |
| Spindle Speed | 2800 | 1400 | 1400 |
| Total Travel in mm | 60 | 125 | 125 |
| Working Travel in mm | 25/50/75 | 25/50/75 | 25/50/75 |
| Thrust Force kgf | 164 @6 kgcm2 | 240@6 kgcm2 | 395@6 kgcm2 |
Precision Hardened and grounded spindle and threads are thread grounded
Precision bearings and lock nuts
Grounded and chrome plated quill
Honed and chrome plated Cylinder and quill housings
Built in cylinder
PTFE seals
Adjustable rapid dis and speed
Adjustable Feed dis and speed
End dwell time
Ideal for production and multi spindle drilling heads
| Description | RVT8LSSF | RVT16LSSF |
|---|---|---|
| Max Tapping Capacity in steel (400n/mm²) | M4 to M8 | M8 to M16 |
| Spindle Type | PB16 | PB20 |
| Spindle Power | 0.37kW/440V | 0.75kW/440V |
| Spindle speed (on request ) | Max 1500 rpm | Max 800 rpm |
| Lead screw pitch | 1mm | 1.5mm |
| Pitch range in mm | 0.7,0.8,1,1.25 | 1,1.25,1.5,1.75,2 |
| Quil Travel in mm | 60 | 70 |
Can be mounted multi spindle Tapping head
All possible customized pitch by changing LEAD SCREW and NUT
Hardened and thread grounded LEAD SCREW
Adjustable quill travel length
Precisely bored, coned, plated quill bore Grounded plated quill
Grounded plated quill
Hardened and grounded spindle Thread grounded spindle
Thread grounded spindle
Spindle nose thread grounded for repeated and easy tool changing
Ideal for productivity through multi spindle tapping
Graded cast iron housing fine machined and bored Dual clutch system prevents tap breakage,
| Description | DT12NCSF | DT20NCSF |
|---|---|---|
| Max Drilling Cap insteel(400n/mm2) in mm | 12 | 20 |
| Max Tapping cap in steel (400n/mm2) | M10 x 1.5 | M16 x 2 |
| Spindle Nose | PB20/MT1/ER32 | PB20/MT2/ER32 |
| Spindle Motor | 0.75kw/440v | 1.1kw/440v |
| Spindle Speed max (VFD) | 2000 | 3000 |
| Total Travel in mm(servo programmble) | 150 | 150 |
| Max axis force in kg | 150 | 250 |
| Control | PLC/HMI | PLC/HMI |
Ideal for high productivity
Ideal for multi spindle and single spindle drilling
High rapid drilling advance and retract speed
Adjustable rapid and feed travel length
Adjustable feed rate
Precisely bored, coned, plated cylinders
Hardened and grounded spindle nose thread grounded
Balanced drive pulleys
